Colloid

This article needs additional citations for verification.
Please help improve this article by adding reliable references. Unsourced material may be challenged and removed. (November 2007)

This article or section contains too much jargon and may need simplification or further explanation.
Please discuss this issue on the talk page, and/or remove or explain jargon terms used in the article. Editing help is available.
This article has been tagged since January 2008.

A colloid or colloidal dispersion is a type of surface chemistry present in the colloid.

Colloidal systems are subjects of Interface and Colloid Science.

There is IUPAC Technical Report^[1] prepared by a group of most known world experts on the subject of interfacial Double Layer and related electrokinetic phenomena.

Because the size of the dispersed phase may be hard to measure, and because colloids look like solutions, colloids are sometimes characterized by their properties. For example, if a colloid has a solid phase dispersed in a liquid, the solid particles will not pass through a membrane, whereas the dissolved ions or molecules of a solution will pass through a membrane. In other words, dissolved components will diffuse through a membrane through which dispersed colloidal particles will not.

Some colloids are translucent because of the Tyndall effect, which is the scattering of light by particles in the colloid. Other colloids may be opaque or have a slight color.

Many familiar substances, including butter, milk, cream, Thomas Graham.

Classification of colloids

Colloids can be classified as follows:

		Dispersed Medium
		Gas	Liquid	Solid
Continuous Medium	Gas	NONE (All gases are mutually miscible)	mist	Solid aerosol Examples: smoke, air particulates
	Liquid	Foam Examples: whipped cream	Emulsion Examples: mayonnaise, hand cream	Sol Examples: milk, paint, pigmented ink
	Solid	Solid Foam Examples: pumice	opal	Solid Sol Examples: cranberry glass, ruby glass

In some cases, a colloid can be considered as a homogeneous (not heterogeneous) mixture. This is because the distinction between "dissolved" and "particulate" matter can be sometimes a matter of approach.

Hydrocolloids

A hydrocolloid is defined as a colloid system wherein the colloid particles are dispersed in water. A hydrocolloid has colloid particles spread throughout water and depending on the quantity of water available can take on different states, e.g., agar, a reversible hydrocolloid of seaweed extract, can exist in a gel and sol state, and alternate between states with the addition or elimination of heat.

Many hydrocolloids are derived from natural sources. For example, pectin is extracted from citrus peel and apple pomace.

Jell-O (trade mark Jell-O), the well-known dessert, is made from gelatin powder, another effective hydrocolloid. Hydrocolloids are employed in food mainly to influence texture or viscosity (e.g., a sauce). Hydrocolloids are also used in skin-care and wound-dressing.

Interaction between colloid particles

The following forces play an important role in the interaction of colloid particles:

Excluded Volume Repulsion: This refers to the impossibility of any overlap between hard particles.
Electrostatic interaction: Colloidal particles often carry an electrical charge and therefore attract or repel each other. The charge of both the continuous and the dispersed phase, as well as the mobility of the phases are factors affecting this interaction.
van der Waals forces: This is due to interaction between two dipoles that are either permanent or induced. Even if the particles do not have a permanent dipole, fluctuations of the electron density gives rise to a temporary dipole in a particle. This temporary dipole induces a dipole in particles nearby. The temporary dipole and the induced dipoles are then attracted to each other. This is known as van der Waals force, and is always present, is short-range, and is attractive.
Entropic forces: According to the second law of thermodynamics, a system progresses to a state in which entropy is maximized. This can result in effective forces even between hard spheres.
Steric forces between polymer-covered surfaces or in solutions containing non-adsorbing polymer can modulate interparticle forces, producing an additional repulsive steric repulsion force (which is predominantly entropic in origin) or an attractive depletion force between them.

Stabilization of a colloidal dispersion

Stabilization serves to prevent colloids from aggregating. Steric stabilization and electrostatic stabilization are the two main mechanisms for colloid stabilization. Electrostatic stabilization is based on the mutual repulsion of like electrical charges. Different phases generally have different charge affinities, so that a charge double-layer forms at any interface. Small particle sizes lead to enormous surface areas, and this effect is greatly amplified in colloids. In a stable colloid, mass of a dispersed phase is so low that its buoyancy or kinetic energy is too little to overcome the electrostatic repulsion between charged layers of the dispersing phase. The charge on the dispersed particles can be observed by applying an electric field: all particles migrate to the same electrode and therefore must all have the same sign charge!

Destabilizing a colloidal dispersion

Unstable colloidal dispersions form flocs as the particles aggregate due to interparticle attractions. In this way photonic glasses can be grown. This can be accomplished by a number of different methods:

Removal of the electrostatic barrier that prevents aggregation of the particles. This can be accomplished by the addition of salt to a suspension or changing the pH of a suspension to effectively neutralize or "screen" the surface charge of the particles in suspension. This removes the repulsive forces that keep colloidal particles separate and allows for coagulation due to van der Waals forces.
Addition of a charged polymer flocculant. Polymer flocculants can bridge individual colloidal particles by attractive electrostatic interactions. For example, negatively-charged colloidal silica particles can be flocculated by the addition of a positively-charged polymer.
Addition of nonadsorbed polymers called depletants that cause aggregation due to entropic effects.
Physical deformation of the particle (e.g., stretching) may increase the van der Waals forces more than stabilization forces (such as electrostatic), resulting coagulation of colloids at certain orientations.

Unstable colloidal suspensions of low-volume fraction form clustered liquid suspensions, wherein individual clusters of particles fall to the bottom of the suspension (or float to the top if the particles are less dense than the suspending medium) once the clusters are of sufficient size for the Brownian forces that work to keep the particles in suspension to be overcome by gravitational forces. However, colloidal suspensions of higher-volume fraction form colloidal gels with viscoelastic properties. Viscoelastic colloidal gels, such as toothpaste, flow like liquids under shear, but maintain their shape when shear is removed. It is for this reason that toothpaste can be squeezed from a toothpaste tube, but stays on the toothbrush after it is applied.

Colloids as a model system for atoms

In physics, colloids are an interesting model system for atoms. Micron-scale colloidal particles are large enough to be observed by optical techniques such as confocal microscopy. Many of the forces that govern the structure and behavior of matter, such as excluded volume interactions or electrostatic forces, govern the structure and behavior of colloidal suspensions. For example, the same techniques that can be used to model ideal gases can be used to model the behavior of a hard sphere colloidal suspension. In addition, phase transitions in colloidal suspensions can be studied in real time using optical techniques, and are analogous to phase transitions in liquids.

Colloids in biology

In the early 20th century, before enzymology was well understood, colloids were thought to be the key to the operation of solute.

References

^ ”Measurement and Interpretation of Electrokinetic Phenomena”, International Union of Pure and Applied Chemistry, Technical Report, published in Pure Appl.Chem., vol 77, 10, pp.1753-1805, 2005